DATS-P8012
A rugged, mobile 8- to 24-channel, 24-bit data acquisition system. Ideal as an entry-level system that can grow with you, or to add channels to an existing DATS-tetrad or DATS-hyper12.
- Up to 300k samples/sec/channel at 24-bit
- Stack units for higher channel counts
- Supplied with DATS software
Description
The P8012 supports up to 24 high-speed analogue inputs plus two tachos. P8012's can be used alone or connected with Tetrad, Hyper12 or other P8012S for flexible channel configurations. The same input options for the DATS-tetrad can be used in a P8012. If you need high-precision measurement, then the DATS-P8012 is an ideal entry-level system that can be upgraded later.
The DATS-P8012 is a rugged, portable data acquisition system with up to 24 high-speed analogue inputs. It uses the same sensor input options as the DATS-tetrad, so you get the same measurement quality in a simpler, cost-effective package.
Ideal as an entry-level system, the DATS-P8012 can be upgraded later. It can also be used as a channel extender for an existing DATS-tetrad or DATS-hyper12, and your measurement modules can be reused as your system grows.
Key benefits
- Quick, easy sensor set-up and fast reconfiguration between tests
- Simple channel configuration with fast verification before each test
- Fully integrated DATS software, suitable for new and experienced users
- Built on decades of real-world noise and vibration measurement experience
Features
- Channels: 4 to 24 analogue inputs per unit, with interconnected systems scaling to more than 1,000 channels
- Sample rates: up to 800,000 samples per second per channel at 16-bit, or 300,000 samples per second per channel at 24-bit
- Synchronisation: Prosync keeps every sample on every channel synchronised, even at high channel counts
- Power: runs from mains or vehicle power
- Connectivity: a single USB connection streams data continuously to your PC or laptop for storage and real-time display
- Expansion: connect to other units or to a DATS-tetrad or DATS-hyper12
Configuration
The DATS-P8012 holds up to three measurement modules, chosen to suit your sensors:
| Module | Description |
|---|---|
| 8412 | 8-channel ADC (IEPE and direct) with tacho |
| 8414 | 8-channel ADC (IEPE, direct and bridge) with tacho |
| 8402 | 4-channel ADC (IEPE, direct and TEDS) with tacho |
| 8404 | 4-channel ADC (IEPE, direct, TEDS and bridge) with tacho |
| 8452 | 4-channel ultra-fast ADC (IEPE, direct and TEDS) with tacho |
| 8408 | 8-channel thermocouple |
| 8420 | 4-channel advanced tacho |
| 8424 | 2 or 4-channel DAC and digital I/O |
DATS software
The DATS-P8012 is supplied with fully integrated DATS capture and analysis software, covering everything from data capture and real-time display to order analysis, waterfalls, 3D views and automated worksheets.
Related products
- No. of Channels: 4 (IEPE, voltage or tacho)
- Resolution: 24-bit
- Max Sample Rate: 144k samples/sec/channel
- Connectivity: USB-C
- Power: USB powered
- No. of Channels: Up to 32 (plus tachos)
- Resolution: 24-bit
- Max Sample Rate: 400k samples/sec/channel
- Connectivity: Gigabit Ethernet, USB
- Power: Battery, 10–36 V DC or AC mains
- No. of Channels: 96 per unit, stackable to 1,000+
- Resolution: 24-bit
- Max Sample Rate: 300k samples/sec/channel (24-bit)
- Connectivity: Ethernet, USB
- Power: Mains or vehicle
- No. of Channels: 4 (expandable with other DATS hardware)
- Hardware: DATS-solo, USB-powered
- Analysis: Automated windowing and FRF
- Export: Word and Excel reports, FEA validation
- Sensors: Use your own or buy from Prosig