A US manufacturer of oil-filled dampers used a Prosig DATS system to pick out partly filled dampers from their sound signature on the production line, reducing returns and costs.
Project at a glance
- Customer: Oil-filled damper manufacturer
- Location: Ohio and Illinois, USA
- Applications: End-of-line testing; Manufacturing and industrial
- Products used: DATS hardware; DATS-dcu digital control unit; DATS software
Background
A manufacturer of oil-filled dampers in Ohio and Illinois, USA, needed a system to automate the testing of its products as they came off the production line.
The challenge
Each damper should have an internal cavity completely filled with oil. Occasionally the cavity is only partly filled, or not filled at all, and the damper does not meet the quality requirements. Shipping non-compliant dampers to customers is very expensive, so faulty parts needed to be identified before they left the factory, without slowing down production.
The solution
Prosig supplied a system built from standard DATS hardware and software, with a DATS-dcu digital control unit to interface with the production line.
Towards the end of the line, information is etched onto each damper. The noise of this process is significantly different for full dampers than for half-full or empty ones. The Prosig system listens to the etching process, identifies full and partly filled dampers from their sound signature, and then activates relays and sends messages based on the result. Operators see a clear pass or fail on screen, with a running count of dampers tested, passed and failed.
The results
- Speeded up testing
- Reduced product returns
- Provided feedback for production improvements
- Worked with the existing production process
Using only the noise from the existing production process, the Prosig system identifies good and bad parts before they reach a customer, helping the manufacturer improve quality and reduce costs.
Related products
- No. of Channels: 96 per unit, stackable to 1,000+
- Resolution: 24-bit
- Max Sample Rate: 300k samples/sec/channel (24-bit)
- Connectivity: Ethernet, USB
- Power: Mains or vehicle
- No. of Channels: Up to 32 (plus tachos)
- Resolution: 24-bit
- Max Sample Rate: 400k samples/sec/channel
- Connectivity: Gigabit Ethernet, USB
- Power: Battery, 10–36 V DC or AC mains
- No. of Channels: 4 (expandable with other DATS hardware)
- Hardware: DATS-solo, USB-powered
- Analysis: Automated windowing and FRF
- Export: Word and Excel reports, FEA validation
- Sensors: Use your own or buy from Prosig
- No. of Channels: 4 (IEPE, voltage or tacho)
- Resolution: 24-bit
- Max Sample Rate: 144k samples/sec/channel
- Connectivity: USB-C
- Power: USB powered
- No. of Channels: 4 (IEPE, voltage or tacho)
- Resolution: 24-bit
- Max Sample Rate: 144k samples/sec/channel
- Connectivity: USB-C
- Power: USB powered




