Skip to main content
Case study

Studying the highway: how road surfaces move under traffic

A transport research organisation used Prosig DATS to measure how road surfaces move as vehicles pass, revealing a bow wave from every wheel.

  • Customer: Major transport research organisation
    Applications: Environmental; Automotive
    Products used: Prosig P8004 24-bit data acquisition system (now part of the DATS hardware range); DATS Toolbox

Background

It would be reasonable to think of a road – or pavement, as the industry calls it – as a solid, rigid surface. In fact, this is far from the truth.

The challenge

A major transport research organisation needed to understand how pavement behaves under different environmental and traffic conditions. Using the results, the construction of future roads could be improved and maintenance costs reduced. The goal was to find a surface that does not flex and break, but is not too rigid.

The solution

A test programme was set up to measure the displacement of the road surface as vehicles pass over it. Specially developed triaxial accelerometers were used to test different pavements, connected to a Prosig P8004 data acquisition system that allowed the data to be monitored in real time.

DATS software converted the acceleration data to displacement and velocity, both in real time and in post-processing. A full spectral analysis of the surface waves then allowed conclusions to be drawn about future pavement construction.

The results

The study showed that vehicles on a road behave much like a ship on the ocean, creating a bow wave – and that each wheel creates its own. As these waves travel through the road surface, some combine to form even larger displacements.

  • A new understanding of how pavement moves under traffic
  • Insight into how temperature and humidity change road behaviour
  • Long-term methods for reducing displacement, developed with construction engineers
  • Better future pavement design and lower maintenance costs

Related products

Prosig DATS-P8012 data acquisition unit, showing the BNC input connectors along the front panel.
DATS-P8012
DATS
Expandable entry-level DAQ
  • No. of Channels: 8 to 24 (plus 2 tachos)
  • Resolution: 24-bit
  • Max Sample Rate: 300k samples/sec/channel (24-bit)
  • Connectivity: USB
  • Power: 10–36 V DC or AC mains adapter
Prosig DATS TETRAD large case
DATS-tetrad
DATS
Portable, reliable, accurate
  • No. of Channels: Up to 32 (plus tachos)
  • Resolution: 24-bit
  • Max Sample Rate: 400k samples/sec/channel
  • Connectivity: Gigabit Ethernet, USB
  • Power: Battery, 10–36 V DC or AC mains
Black and white view of busy motorway traffic between wooded embankments