Skip to main content

End-of-line testing

Noise and vibration testing on the production line

Fast, repeatable pass/fail testing that checks every product meets its noise and vibration specification before it leaves the factory.

Noise and vibration are some of the clearest indicators of build quality. A faulty bearing, a misaligned gear or a loose component often shows up as a change in vibration long before it becomes a warranty claim.

Prosig end-of-line test systems use DATS data acquisition hardware and software to measure noise and vibration on every unit, compare the results against your limits and give the operator a clear pass, warn or fail. Tests run automatically, results are recorded for every product, and the system can switch between product variants with different limits at the press of a button.

What we test

  • Electric motors and gearboxes
  • Pumps, fans and compressors
  • Oil-filled dampers and suspension components
  • Water meters and other precision products
  • Complete vehicles and vehicle sub-systems

How it works

Each test is built around your product and your production process. A typical end-of-line system:

  • Measures vibration and noise from accelerometers and microphones, with optional speed and CAN bus inputs
  • Calculates overall levels, spectra and order or gear-mesh frequencies
  • Compares each result against pass, warn and fail limits for the model under test
  • Interfaces with your production line, so tests start and finish automatically
  • Records every result and produces test reports automatically, for full traceability

Why Prosig

  • Dramatically reduced test times
  • One system that works across all your product variants
  • Automatic recording of results and test reports
  • Consistent, operator-independent pass/fail decisions
  • Over 45 years of noise and vibration measurement expertise
Real-world end-of-line testing case studies
Testing oil-filled dampers

A manufacturer of oil-filled dampers needed to automate product testing. The system uses standard Prosig hardware and software, with a DATS-dcu control unit interfacing with the production line.

Electric motors and gearboxes

A US electric motor manufacturer asked Prosig to integrate an end-of-line vibration test that qualifies multiple motor models and checks gearbox gear tooth contact frequencies.

Understanding water meters

A UK manufacturer of domestic and industrial water meters automated the testing of meters taken from production, so accuracy stays within statutory limits and neither customer nor supplier is over or undercharged.

Whole vehicle testing

A major US vehicle manufacturer chose Prosig to develop an end-of-production-line test that checks that noise and vibration are within design limits, measuring quality and reducing future complaints and warranty claims.

Explore other applications
Row of large satellite dishes under a cloudy sky, in black and white.
Space

High-channel-count data acquisition for satellite, launcher and space hardware testing.

Precision measuring probe checking the surface of an engine cylinder block, in black and white.
Advanced engineering

Flexible measurement and analysis tools for research, development and complex test programmes.

Wind turbines across misty farmland at dawn, in black and white.
Power generation

Vibration measurement and analysis for turbines, generators and critical rotating machinery.

Close-up of a vehicle engine bay showing the engine, pipework and wiring, in black and white.
Automotive testing and NVH

Capture and analyse noise, vibration and harshness data on the road, on the rig or in the lab.

Busy motorway at night lined with noise barriers, in black and white.
Environmental

Measure and monitor noise and vibration from traffic, construction and industrial sources.

Worm gear shaft with roller bearings on a dark workshop surface, in black and white.
Manufacturing and industrial

Understand machine behaviour, reduce downtime and improve product quality on the factory floor.

Recommended products
Prosig DATS SOLO small case
DATS hardware

Portable and high-channel-count data acquisition systems, from 4 to 96 inputs.

Computer screen showing Prosig product software
DATS software

Capture, process, analyse and report on noise and vibration data in one package.

PlantProtech Protor Mobile vibration monitoring unit, showing its front panel of input connectors and display.
PROTOR

The PlantProtech PROTOR Mobile is a high-speed data acquisition and diagnostic system for critical rotating machinery.

Technical resources
Noise and vibration handbook

Free 7th edition guide

Our free guide to the principles and practice of noise and vibration measurement, from transducers to analysis.

Case studies

Real-world applications

See how engineers use Prosig systems to solve real noise and vibration challenges across industries.

Video library

Watch and learn

Short videos on Prosig products, measurement techniques and tips to get the most from your system.

 

Talk to an engineer about your production test

Tell us about your product and your line, and we'll recommend the right end-of-line test system.
Latest news and events
Black and white close-up of a car wheel and tyre
Event
Automotive Testing Expo India 2027
20 April 2027 - 22 April 2027
Hall 4, CTC Complex Chennai, India
Meet Prosig at Automotive Testing Expo India 2027 in Chennai – Hall 4, stand 1082.
DJB Instruments and Prosig exhibiting at Space Tech Expo Europe 2026 in Bremen, Germany, 17–19 November, Hall 7 Stand ZZ15.
Event
Space Tech Expo Europe 2026
17 November 2026 - 19 November 2026
Messe Bremen, Findorffstrasse 101, 28215 Bremen, Germany
Meet DJB Instruments and Prosig at Space Tech Expo Europe 2026 in Bremen for advanced vibration measurement and testing solutions.