Skip to main content
Image
Prosig DATS TETRAD large case
DATS-tetrad
Hardware product

Record anywhere, with or without a PC

A rugged, portable data acquisition system with up to 32 channels. Battery powered, MIL-STD tested and stackable to over 1,000 channels.

Image
Prosig DATS SOLO small case
DATS-solo
Hardware product

Record anywhere, with or without a PC

A rugged, portable data acquisition system with up to 32 channels. Battery-powered, MIL-STD-tested, MIL-STD tested and stackable to over 1,000 channels.

Image
Engineer striking a structure with an impact hammer fitted with a sensor during a hammer impact test.
DATS-HITS
Hardware product

Get reliable impact test results, the first time

DATS-HITS guides you step by step from set-up to the results report, so you can identify natural frequencies and resonances quickly and accurately.

Image
Front panel of the Prosig DATS-hyper12 showing numbered analogue input connectors.
DATS-hyper12
Hardware product

High Channel Count Data Acquisition System

96 high-speed inputs in a single portable or rack-mount unit, stackable to over 1,000 synchronised channels for the largest test programmes.

Image
Prosig DATS-P8012 data acquisition unit, showing the BNC input connectors along the front panel.
DATS-P8012
Hardware product

A rugged, mobile 8- to 24-channel, 24-bit data acquisition system. Ideal as an entry-level system that can grow with you, or to add channels to an existing DATS-tetrad or DATS-hyper12.

  • Up to 300k samples/sec/channel at 24-bit
  • Stack units for higher channel counts
  • Supplied with DATS software
Image
CAN bus data logger units, with one open to show its circuit board and battery.
DATS-CANetic
Hardware product

See vehicle bus data alongside your measurements

A rugged, palm-sized Kvaser CAN bus logger, fully integrated with DATS, so your CAN data is synchronised with your noise and vibration measurements.

Image
Front panels of Prosig DATS 8X02, 8X04 and 8X12 measurement cards
DATS measurement cards
Hardware product

Configure your DATS system for exactly the measurements you need

  • Fit up to 4 cards in a DATS-tetrad, 12 in a DATS-hyper12 and 3 in a DATS-P8012
  • Up to 8 analog channels and a tacho input per card
  • Sample rates up to 800k samples/second/channel (16-bit) or 300k (24-bit)
  • IEPE, DC and AC inputs, with TEDS support
  • Bridge completion and programmable excitation for strain gauges
  • Thermocouple, advanced tacho and analog output options
  • Mix and match cards in one chassis
Image
Prosig DATS wireless remote control
DATS Wireless remote control
Hardware product

Wireless control of your DATS-tetrad, from setup to results

  • Connect a tablet, laptop or PC wirelessly to a DATS-tetrad
  • Standalone operation, with real-time displays
  • Full configuration of acquisition parameters
  • Easy to set up
  • Fewer cables and wires
  • Secure private network
Image
Prosig DATS-tetrad exocase
DATS-tetrad EXOcase and softshell sleeve
Hardware product

Two ways to protect your DATS-tetrad, in transit and in use

  • EXOcase: custom storage for the DATS-tetrad and its accessories
  • EXOcase: scratch and water resistant, IP56 rated
  • EXOcase: MIL-SPEC 81-41 approved, 6x stronger than a traditional flight case
  • Softshell Sleeve: 4mm die-cut precision neoprene
  • Softshell Sleeve: chemical and water resistant on covered surfaces
  • Operate the system while it's protected
Image
DJB A142 monoaxial IEPE accelerometer with braided cable
A/142 Mono-Axial IEPE Accelerometer
Hardware product

The A/142 is a sub-miniature mono-axial IEPE accelerometer for vibration measurement on small components and lightweight structures. Weighing just 0.35 grams, it combines a titanium alloy case, adhesive mounting and an integral cable for installations where space and sensor weight are critical.

Image
DJB AT/10-1 tri-axial IEPE accelerometer in a titanium case with side entry connector
AT/10-1 Tri-Axial IEPE Accelerometer
Hardware product

The AT/10-1 is a compact tri-axial IEPE accelerometer for measuring vibration in three axes at once. Weighing just 6.9 grams, it combines a titanium case, a ceramic isolated adhesive mount and a side entry 1/4-28 UNF connector, with five standard sensitivity options from 1 mV/g to 100 mV/g.

Image
DJB AT/10.10-1.C1 tri-axial IEPE accelerometer with side entry 8-36 connector
AT/10.10-1.C1 Tri-Axial IEPE Accelerometer
Hardware product

The AT/10.10-1.C1 is a 10 mV/g tri-axial IEPE accelerometer for measuring vibration in three axes at once. It combines a 6.9-gram titanium case and ceramic isolated adhesive mount with a compact side-entry 8-36 connector, and is available with an extended temperature option up to 165°C.

CMTG USA

Address

945 N. Edgewood Avenue
Suite G
Wood Dale, IL 60191
United States

Type of location
CMTG Site
Email address
Info@cmtg.com
Telephone
+1 847 228 0985
CMTG Brand
Brands stocked
Location
POINT (-87.9677515 41.9813545)

Kistler Nordic AB

Address

Kistler Nordic AB
Särkiniementie 3
11101 Riihimäki
Finland

Type of location
Distributor
Email address
jani.laatikainen@kistler.com
Telephone
+358 19 75 72 54
Brands stocked
Location
POINT (24.7385107 60.1098678)

Ritec

Address

The Condition Monitoring Company
63 Road 14 Maadi
Cairo
Cairo Governorate
11431
Egypt

Type of location
Distributor
Email address
ritec@ritec-eg.com
Telephone
+202 2358 2875
Brands stocked
Location
POINT (31.261642 29.9598139)