Skip to main content
DJB AT/10-1 tri-axial IEPE accelerometer in a titanium case with side entry connector
AT/10-1
Tri-axial adhesive mount
  • Sensitivity: 1 mV/g to 100 mV/g (5 standard options)
  • Measurement range: ±500 g peak (10 mV/g)
  • Frequency response (±5%): 1 Hz to 7 kHz
  • Weight: 6.9 grams
  • Mounting: Adhesive, ceramic isolated base
  • Connector: Side entry 1/4-28 UNF, 4 pin
DJB A142 monoaxial IEPE accelerometer with braided cable
A/142
Sub-miniature adhesive mount
  • Sensitivity: 5 mV/g, 10 mV/g
  • Measurement range: ±1000 g peak (5 mV/g); ±500 g peak (10 mV/g)
  • Frequency response (±5%): 3 Hz–10 kHz (5 mV/g); 5 Hz–10 kHz (10 mV/g)
  • Weight: 0.35 grams
  • Mounting: Adhesive
  • Connection: Integral cable with customisable output connector
A/124/TE mono-axial IEPE accelerometer
A/124/TE-1
Sub-miniature adhesive mount (isolated base)
  • Sensitivity: 1 to 100mV/g 
  • Frequency range: 0.7Hz to 13kHz  
  • Temperature range: -50°C to 125°C
  • Dimensions: 8mm (A/F) x 12.6mm
  • Weight: 2.1 grams
A/124/E-1 mono-axial IEPE accelerometer
A/124/E-1
Sub-miniature adhesive mount (isolated base)
  • Sensitivity: 1 to 100mV/g 
  • Frequency range: 0.7Hz to 13kHz 
  • Temperature range: -50°C to 125°C 
  • Dimensions: 8mm (A/F) x 9.4mm
  • Weight: 2.1 grams
A/124/TE mono-axial IEPE accelerometer
A/124/TE
Sub-miniature adhesive mount
  • Sensitivity: 1 to 100mV/g 
  • Frequency range: 0.7Hz to 13kHz 
  • Temperature range: -50°C to 125°C 
  • Dimensions: 8mm (A/F) x 12.3mm
  • Weight: 1.8 grams
A/124/E mono-axial IEPE accelerometer
A/124/E
Sub-miniature adhesive mount
  • Sensitivity: 1 to 100mV/g 
  • Frequency range: 0.7Hz to 13kHz  
  • Temperature range: -50°C to 125°C
  • Dimensions: 8mm (A/F) x 9.2mm
  • Weight: 2.1 grams
A/127/V mono-axial IEPE accelerometer
A/127/V
Sub-miniature tear-drop adhesive mount
  • Sensitivity: 1 to 100mV/g 
  • Frequency range: 0.7Hz to 13kHz 
  • Temperature range: -50°C to 125°C 
  • Dimensions: 11.1 x 7.1 x 5.4mm 
  • Weight: 1.4 grams
VB/02 battery powered single channel IEPE signal conditioning unit
VB/02
Battery Powered IEPE Signal Conditioning Unit
  • No. of Channels: 1
  • Input Gain Options (per Channel): x1, x10 & x100
  • Input Connector: BNC 
  • Output Connector: BNC
  • Battery Powered: 2x PP3 batteries, 18V DC (not supplied)
CV3-CV Charge/Voltage Signal Conditioning Unit
CV3-CV
Combined Charge & IEPE Signal Conditioner/Amplifier
  • No. of Channels: 3
  • Input Gain Options (per Channel): x1, x10 & x100
  • Inputs: BNC 
  • Outputs: BNC 
CV9-CV 9 channel charge IEPE amplifier
CV9-CV
Combined Charge & IEPE Signal Conditioner/Amplifier
  • No. of Channels: 9
  • Input Gain Options (per Channel): x1, x10 & x100
  • Inputs: BNC 
  • Outputs: BNC
Subscribe to DJB